[2020.7] Easily pass Fortinet NSE7_EFW-6.2 exam tips and online NSE7_EFW-6.2 exam practice questions

How do I pass the exam?

How do I pass the Fortinet NSE7_EFW-6.2 exam?

Fulldumps free to share the latest Fortinet exam exercise questions and answers! NSE7_EFW-6.2 Exam Certifications “Fortinet NSE 7 – Enterprise Firewall 6.2” You can find the free NSE7_EFW-6.2 pdf, NSE7_EFW-6.2 practice questions online test and our recommended https://www.leads4pass.com/nse7_efw-6-2.html (brain dumps). Pass the exam with ease! Online learning helps you improve your skills and exam experience!

Fulldumps NSE7_EFW-6.2 exam catalog

Fulldumps Fortinet NSE7_EFW-6.2 video tutorial

Latest Fortinet NSE7_EFW-6.2 exam pdf free download

[PDF Q1-Q12] Free Fortinet NSE7_EFW-6.2 pdf dumps download from Google Drive: https://drive.google.com/file/d/1KF8FFljfHhfVARp62daL40briCodp9Vq

NSE 7 Network Security Architect – Fortinet Training: https://training.fortinet.com/local/staticpage/view.php?page=nse_7

The NSE 7 Network Security Architect designation recognizes your advanced skills ans ability to deploy, administer,
and troubleshoot Fortinet security solutions.

Program Requirements
You must successfully pass at least one of the NSE 7 exams:

  • Fortinet NSE 7 – Advanced Threat Protection
  • Fortinet NSE 7 – Enterprise Firewall
  • Fortinet NSE 7 – Secure Access
  • Fortinet NSE 7 – Cloud Security

Latest Updates Fortinet NSE7_EFW-6.2 Exam Practice Questions and Answers

QUESTION 1

When using the SSL certificate inspection method to inspect HTTPS traffic, how does FortiGate filter web requests
when the client browser does not provide the server name indication (SNI) extension?
A. FortiGate uses the requested URL from the user\’s web browser.
B. FortiGate uses the CN information from the Subject field in the server certificate.
C. FortiGate blocks the request without any further inspection.
D. FortiGate switches to the full SSL inspection method to decrypt the data.

Correct Answer: B

QUESTION 2

Refer to the exhibit, which contains the output of diagnose sys session list.

fulldumps NSE7_EFW-6.2 q2

If the HA ID for the primary unit is zero (0), which statement about the output is true?
A. This session cannot be synced with the slave unit.
B. The inspection of this session has been offloaded to the slave unit.
C. The master unit is processing this traffic.
D. This session is for HA heartbeat traffic.

Correct Answer: C

QUESTION 3

Refer to the exhibit, which contains a partial routing table.

fulldumps NSE7_EFW-6.2 q3

Assuming all the appropriate firewall policies are configured, which two pings will FortiGate route? (Choose two.)
A. Source IP address: 10.72.3.52, Destination IP address: 10.1.0.254
B. Source IP address: 10.73.9.10, Destination IP address: 10.72.3.15
C. Source IP address: 10.10.4.24, Destination IP address: 10.72.3.20
D. Source IP address: 10.1.0.10, Destination IP address: 10.64.1.52

Correct Answer: AD

QUESTION 4

Refer to the exhibit, which contains the output of a BGP debug command.

fulldumps NSE7_EFW-6.2 q4

Which statement about the exhibit is true?
A. The local router has received a total of three BGP prefixes from all peers.
B. The local router has not established a TCP session with 100.64.3.1.
C. Since the counters were last reset, the 10.200.3.1 peer has never been down.
D. The local router BGP state is OpenConfirm with the 10.127.0.75 peer.

Correct Answer: B

QUESTION 5

Refer to the exhibit, which contains a partial output of an IKE real-time debug.

fulldumps NSE7_EFW-6.2 q2

Based on the debug output, which phase-1 setting is enabled in the configuration of this VPN?
A. auto-discovery-receiver
B. auto-discovery-forwarder
C. auto-discovery-sender
D. auto-discovery-shortcut

Correct Answer: C

QUESTION 6

Refer to the exhibit, which contains the output of a debug command.

fulldumps NSE7_EFW-6.2 q6

Which two statements about the exhibit are true? (Choose two.)
A. The local FortiGate OSPF router ID is 0.0.0.4.
B. The local FortiGate is the backup designated router.
C. In the network connected to port4, two OSPF routers are down.
D. Port4 is connected to the OSPF backbone area.

Correct Answer: AD

QUESTION 7

Refer to the exhibit, which contains partial outputs from two routings debug commands.

fulldumps NSE7_EFW-6.2 q7

Which outbound interface will FortiGate use to route web traffic from internal users to the Internet?
A. port3
B. port2
C. port1
D. Both port1 and port2

Correct Answer: C

QUESTION 8

What is the diagnose test application IPS monitor 99 commands used for?
A. To enable IPS bypass mode
B. To provide information regarding IPS sessions
C. To disable the IPS engine
D. To restart all IPS engines and monitors

Correct Answer: D

QUESTION 9

Which three conditions are required for two FortiGate devices to form an OSP adjacency? (Choose three.)
A. OSPF costs match
B. OSPF peer IDs match
C. Hello and dead intervals match
D. OSPF IP MTUs match
E. IP addresses are in the same subnet

Correct Answer: CDE

QUESTION 10

Refer to the exhibit, which contains the partial output of an IKE real-time debug.

fulldumps NSE7_EFW-6.2 q10

Why did the tunnel not come up?
A. The pre-shared keys do not match
B. The remote gateway phase 1 configuration does not match the local gateway phase 1 configuration.
C. The remote gateway phase 2 configuration does not match the local gateway phase 2 configuration.
D. The remote gateway is using aggressive mode and the local gateway is configured to use the main mode.

Correct Answer: B

QUESTION 11

What does the dirty flag mean in a FortiGate session?
A. The session must be removed from the former primary unit after an HA failover.
B. Traffic has been blocked by the antivirus inspection.
C. Traffic has been identified as an application that is not allowed.
D. The next packet must be re-evaluated against the firewall policies.

Correct Answer: D

QUESTION 12

An administrator has configured two FortiGate devices for an HA cluster. While testing the HA failover, the administrator
notices that some of the switches in the network continue to send traffic to the former primary unit. The administrator
decides to enable the setting link-failed-signal to fix the problem.
Which statement about this command is true?
A. It forces the former primary device to shut down all its non-heartbeat interfaces for one second while the failover
occurs.
B. It disables all the non-heartbeat interfaces in all the HA members for two seconds after a failover.
C. It sends a link failed signal to all connected devices.
D. It sends an ARP packet to all connected devices, indicating that the HA virtual MAC address is reachable through a
new master after a failover.

Correct Answer: A

QUESTION 13

Which two statements about application layer test commands are true? (Choose two.)
A. They are used to filter real-time debugs.
B. They display real-time application debugs.
C. Some of them can be used to restart an application.
D. Some of them display statistics and configuration information about a feature or process.

Correct Answer: CD

Share lead4Pass Fortinet NSE7_EFW-6.2 Coupon codes for free 2020

lead4pass coupon 2020

Lead4Pass Reviews

Lead4Pass has many years of exam experience! Help many friends pass the Fortinet exam! Lead4pass year-round update exams are up to date and effective! The most authoritative examination certification expert! Highest pass rate! Best price/performance ratio! Guaranteed to pass the first exam!

about lead4pass

Fortinet NSE7_EFW-6.2 Exam Tips Summary:

Fortinet NSE7_EFW-6.2 is already the ultimate help here, we share the latest exam pdf, the latest online exercise questions!
And the brand website recommends “Lead4Pass”.

Latest update Lead4pass NSE7_EFW-6.2 exam dumps: https://www.leads4pass.com/nse7_efw-6-2.html (30 Q&As)

[Q1-Q12 PDF] Free Fortinet NSE7_EFW-6.2 pdf dumps download from Google Drive: https://drive.google.com/file/d/1KF8FFljfHhfVARp62daL40briCodp9Vq