The latest Microsoft MB-320 dumps by Lead4Pass helps you pass the MB-320 exam for the first time! Lead4Pass Latest Update Microsoft MB-320 VCE Dump and MB-320 PDF Dumps, Lead4Pass MB-320 Exam Questions Updated, Answers corrected! Get the latest LeadPass MB-320 dumps with Vce and PDF: https://www.leads4pass.com/mb-320.html (Q&As: 142 dumps)

[Free MB-320 PDF] Microsoft MB-320 Dumps PDF can be collected on Google Drive shared by Lead4Pass:
https://drive.google.com/file/d/1_e7E4tmaJmzII1FePpPspxogHVcIMp1E/

[Lead4pass MB-320 Youtube] Microsoft MB-320 Dumps can be viewed on Youtube shared by Lead4Pass

https://youtube.com/watch?v=Xy-U4C6Xk1M

Microsoft MB-320 Online Exam Practice Questions

QUESTION 1
A manufacturing company uses license plates for inventory tracking of all materials. Part M92020 is stored with 30 units
for each license plate. You create a production order that indicates one unit of part M9202 and release the order for
picking. There is no inventory currently available in the production input location.
The warehouse fast-tab setup for part M92020 is shown below. (Missing the exhibit)
Use the drop-down menus to select the answer choice that answers each question based on the information presented
in the graphic. NOTE: Each correct selection is worth one point.
Hot Area: lead4pass mb-320 exam questions q1

Correct Answer:

lead4pass mb-320 exam questions q1-1

 

QUESTION 2
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains
a unique solution that might meet the stated goals. Some question sets might have more than one correct solution,
while
others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not
appear on the review screen.
A company uses Dynamics 365 Supply Chain Management to manage production configuration.
A product designer creates a remote control toy that can be purchased with different tire sizes.
Sales representatives need to perform product configuration for the custom tire variants when they create a new order.
Solution: Select the custom tire size when filling out the item requirement line.
Does the solution meet the goal?
A. Yes
B. No
Correct Answer: B

 

QUESTION 3
You are the quality assurance manager of a pharmaceuticals company.
One of your customers has requested to only receive batches of item B0001 that have an acid concentration between
5.5% -10.5%.
You need to set up the customer-specific batch attribute to track percent acid for B0001.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions
to the answer area and arrange them in the correct order.
Select and Place:lead4pass mb-320 exam questions q3

Correct Answer:

lead4pass mb-320 exam questions q3-1

Reference: https://docs.microsoft.com/en-us/dynamics365/supply-chain/production-control/batch-attributes

 

QUESTION 4
A manufacturer produces HDMI cables. Typically, the item is manufactured.
The manufacturer will occasionally buy unbranded HDMI cables from a vendor in order to keep up with demand. The
company must use the same item number whether they make or buy the item.
What should you do?
A. Select route type as a vendor on the route operation when the item is to be purchased.
B. In default order settings, select Production for the default order type
C. Create a new vendor resource when the item is to be purchased
D. In default order settings, select Purchase for the default order type
Correct Answer: A

 

QUESTION 5
You are the production scheduler at a manufacturing company. The company is not using advanced warehousing.
You have firmed a planned production order from master planning. The order is ready to be processed.
You now need to process the order in production control.
What should you do first?
A. Report the order as finished
B. Estimate the order
C. Schedule the order
D. Start the order
Correct Answer: B

 

QUESTION 6
A company uses warehouse management and manufacturing execution to process its production orders.
You configure the manufacturing execution production order defaults to always consume Bill of materials (BOM)
components when an operation step is completed in the job registration terminal. You create a production order. The
order is in
released status.
You need to process this order all the way through to end status.
Which four actions should you perform in sequence? To answer, check the appropriate actions to the answer area and
arrange them in the correct order.
Select and Place:lead4pass mb-320 exam questions q6

Correct Answer:

lead4pass mb-320 exam questions q6-1

 

QUESTION 7
A company produces homeopathic lotions for pain relief. The lotions use a combination of ProductA and ProductB.
product is the primary ingredient. You use ProductB to adjust the concentration of active ingredients in the lotion.
You need to ensure that the lotion final product has a consistent concentration of anti-inflammatory agents.
Which two actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
A. Set the formula line type of ProductB to Active.
B. Set the formula line type of ProductA to Active.
C. Set the formula line type of ProductB to Compensating.
D. Set the formula line type of ProductA to Compensating.
E. Set the formula line type of ProductC to None.
Correct Answer: BC
Reference: https://docs.microsoft.com/en-us/dynamics365/supply-chain/production-control/batch-balancing

 

QUESTION 8
A company sells large batches of chemicals. Item specifications vary from batch to batch.
You must fulfill multiple orders from the same batch of chemicals. If a single batch cannot be reserved, manual
reservation must be used. The system must also make reservations based on the earliest batch receipt date.
You need to set up a new chemical item that automatically uses the new batch reservation logic.
Which three settings should you configure? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
A. In the Tracking dimension group, select Coverage plan by dimension for batch number.
B. In the Item model group, select FEFO date-controlled.
C. In the Item model group, select the FIFO inventory model.
D. In the Item model group, select the Same batch reservation and Consolidate requirements.
E. In the Storage dimension group, select Coverage plan by dimension for the site and warehouse dimensions.
Correct Answer: ACD
Reference: https://docs.microsoft.com/en-us/dynamics365/supply-chain/sales-marketing/reserve-same-batchsalesorder

 

QUESTION 9
SIMULATION
You are a functional consultant for Contoso Entertainment System USA (USMF).
You need to schedule the Material Requirements Planning (MRP) master plan to run nightly at 03:00 (UTC-8).
To complete this task, sign in to the Dynamics 365 portal.
Correct Answer:
You need to configure a batch job to run the master plan nightly.
Create the batch job
1.
Go to Navigation pane > Modules > System administration > Inquiries > Batch jobs.
2.
Click New.
3.
In the Job description field, type a value.
4.
In the Scheduled start date/time field, enter a date and time.
5.
Click Save.
Create a recurrence
1.
On the Action Pane, click Batch job.
2.
Click Recurrence. Use these options to enter a range and pattern for the recurrence.
3.
Click OK.
Reference: https://docs.microsoft.com/en-us/dynamics365/fin-ops-core/dev-itpro/sysadmin/tasks/createbatch-job

 

QUESTION 10
A Discrete manufacturing company produces speakers. The high-end speaker model uses protective rubber strips on
the edges.
Approximately five inches of rubber is consistently scrapped in the production process, regardless of production
quantity. Workers manually consume the extra material on the picking list or scrap it in an inventory journal. k
You need to configure the system to automatically account for this scrap on the Bill of materials (BOM).
What should you do?
A. Increase the required quantity of the rubber component by five on the BOM.
B. Set a Variable scrap of five percent for the rubber BOM line.
C. Add an additional BOM line for five inches and set consumption to Variable.
D. Set a Constant scrap of five on the BOM line for rubber.
Correct Answer: D
References: https://docs.microsoft.com/en-us/dynamicsax-2012/appuser-itpro/about-information-used-inbomcalculationswith-standard-costs

 

QUESTION 11
A company uses Dynamics 365 Process manufacturing.
Employees work a half-day so that they can attend a company event. You have a rush order that must be completed
that same day.
After reviewing the net requirements of the batch order, only 400 of the total quantity of 1400 units must be completed
today. The production manager must retain the original batch number as a quantity of 400. The original batch number
must appear on documentation for the customer.
You need to split the batch order into two orders.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions
to the answer area and arrange them in the correct order.
Select and Place:lead4pass mb-320 exam questions q11

Correct Answer:

lead4pass mb-320 exam questions q11-1

 

QUESTION 12
A company uses separate finished good item numbers for size variations of the same product.
The company wants to minimize the number of variously-sized items that are created.
You need to perform the setup to allow variants in size to the product master.
Which five actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to
the answer area and arrange them in the correct order.
Select and Place:lead4pass mb-320 exam questions q12

Correct Answer:

lead4pass mb-320 exam questions q12-1

Reference: https://gfeaxblog.wordpress.com/2017/09/28/o365-how-to-create-product-masters/

 

QUESTION 13
A paint manufacturer is using Process manufacturing. The manufacturer has a quality error. Batches of paint that use
the wrong formula has been marked for rework.
The production planner reports they cannot schedule the batch order even though the order has been estimated.
You need to add reservations to the items to be used for the rework order.
What should you do?
A. Reserve the inventory in the formula
B. Reset the batch order and delete the formula items. Re-enter the formula items
C. Add by-products that need to be used and then re-estimate
D. Add co-products that need to be used and then re-estimate
Correct Answer: A


latest updated Microsoft MB-320 exam questions from the Lead4Pass MB-320 dumps! 100% pass the MB-320 exam! Download Lead4Pass MB-320 VCE and PDF dumps: https://www.leads4pass.com/mb-320.html (Q&As: 142 dumps)

Get free Microsoft MB-320 dumps PDF online: https://drive.google.com/file/d/1_e7E4tmaJmzII1FePpPspxogHVcIMp1E/